August 2012

Membership in the local Administrators group, or equivalent, is the minimum required to complete this procedure.
  1.  first we have to install RRAS from   server mgr >> add roles. and install it.  
  2. Open the Routing and Remote Access MMC snap-in.
  3. In the console tree, expand the server name, and then expand IPv4.
  4. Under IPv4, right-click General, and then select New Routing Protocol.
  5. Select DHCP Relay Agent, and then click OK.
  6. Right-click DHCP Relay Agent, and then select New Interface.
  7. Select the interface that corresponds to the VPN server’s LAN adapter, and then click OK.
  8. On the General tab, make sure that Relay DHCP packets is selected and then, if necessary, select values for Hop-count threshold and Boot threshold.


  9. Click OK.
  10. Repeat steps 5 through 8 for the interface to which the remote access clients connect.

Hello friends today i wanna discuss  some thing abt Home Folder . and How to create home folder
lets seee

This step-by-step article describes how to use the Active Directory Users and Computers management console, the Computer Management management console, a logon script, or the command line to assign a home folder to a user.

Home folders and My Documents make it easier for an administrator to back up user files and manage user accounts by collecting the user's files in one location. If you assign a home folder to a user, you can store the user's data in a central location on a server, and make backup and recovery of data easier and more reliable.

If no home folder is assigned, the computer assigns the default local home folder to the user account. The home folder can use the same location as the My Documents folder. When you are using Windows 2003 Terminal Services, the user profile is the default home folder.

Assign a home folder to a domain user

Note: To specify a network path for the home folder, you must first create the network share and set permissions that permit the user access. You can do this with Shared Folders in Computer Management on the server computer.

To assign a home folder to a domain user:
  1. Click Start, point to Programs, point to Administrative Tools, and then click Active Directory Users and Computers.
  2. In the console tree, click Users.
  3. In the Details pane, right-click the user account, and then click Properties.
  4. In the Properties dialog box, click Profile.
  5. Under the Home folder, type the folder information. To do this, follow these steps:
    1. To assign a home folder on a network server, click Connect, and then specify a drive letter.
    2. In the To box, type a path. This path can be any one of the following types:
    • Network path, for example:
      \\server\users\MrVerma
    • You can substitute username for the last subfolder in the path, for example:
      \\server\users\killer                                       ( killer= user name)
    Note In these examples, server is the name of the file server housing the home folders, and users is the shared folder.
  6. Click OK.

Assign a home folder to a local user

To assign a home folder to a local user:

  1. Click Start, click Control Panel, double-click Administrative Tools, and then double-click Computer Management.
  2. In the console tree, click Users in Local Users and Groups.
  3. Click the user account.
  4. Click the Action menu, and then click Properties.
  5. Click the Profile tab, click Connect, and then specify a drive letter.
  6. In the To box, type a path. This path can be any of the following types:
    • Network path, for example:
      \\server\users\tester
    • You can substitute username for the last subfolder in the path, for example:
      \\server\users\username


      Where server is the name of the file server housing the home folders, and where users is the shared folder.
  7. Click OK.

Specify a home folder for a terminal server

In Windows Server 2003, you can specify a home folder for a terminal server. Assign each user on a terminal server a unique home folder. This makes sure that you store the program information separately for each user in the multi-user environment.

Note: If you specify only the home folder for Windows Server 2003, both Windows 2003 and Terminal Services use this home folder.

To specify a home folder for a terminal server, use one of the following procedures.

Domain user account

  1. Click Start, point to Programs, point to Administrative Tools, and then click Active Directory Users and Computers.
  2. In the console tree, expand the domain node, and then click the Users folder.
  3. Double-click the user account.
  4. Click the Terminal Services Profile tab.
  5. If the Terminal Services home folder is on the local server, click Local path, and then type the path of the profile.

    Note If you do not specify the location path in the Terminal Service Home folder pane, the default local home folder is located at the following path:
    system drive\Documents and Settings\username
  6. If the Terminal Services home folder is on a network share, click Connect, select a drive to connect, and then type the network path.
  7. Click OK.

Local user account

  1. Click Start, point to Programs, point to Administrative Tools, and then click Computer Management.
  2. In the console tree, click Users in Local Users and Groups.
  3. Double-click the user account.
  4. Click the Terminal Services Profile tab.
  5. If the Terminal Services home folder is on the local server, click Local path, and then type the path of the profile.

    Note If you do not specify the location path in the Terminal Service Home folder pane, the default local home folder is located at the following path:
    system drive\Documents and Settings\username
  6. If the Terminal Services home folder is on a network share, click Connect, select a drive to connect, and then type the network path.
  7. Click OK.

Assign a home folder to a user from the command line

You can use the net user command to assign a home folder to a user from the command line. For example, at the command line, type the following command, and then press ENTER:
net user tester /homedir:\\server\tester$
This command assigns the tester$ hidden shared folder on the server to the user Tester.

Assign a home folder to a user by using a logon script

You can automate user account creation and home folder assignment. You can use the net user command to create local user accounts in configuration scripts.

Create a logon script

The following example creates a user named "tester". The user is created with a comment, password expiration settings, home folder, and profile path configured:
NET USER tester /add /comment:"Example Account for User"
/expires:never
/homedir:\\Verma\%username%$
/profilepath:\\verma\profile

Assign a logon script to a profile

To assign a logon script to a profile, follow these steps:
  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click Administrative Tools, and then double-click Computer Management.
  3. In the console tree, click Local Users and Groups, and then click Users.
  4. Click the user account, click Action, and then click Properties.
  5. Click Profile, and then type the file name of the script in the Logon script box.

    Note: For local accounts, the logon script path is %Systemroot%\System32\Repl\Import\Scripts. However, this folder is not created if you perform a clean installation of Windows Server 2003. If the logon script is stored in a subfolder of the domain controller, type the following login script path before the logon script name:
    sysvol\domainname\scripts

Note: You can also use Group Policy to assign home folders. For additional information about using Group Policy to assign home folders see the "To change the path of a user's home directory" topic in the Windows 2003 help files.

This HowTo should show you how to install a VPN Server on Windows Server 2008 R2. This is a HowTo for a small environment or a stand-alone hosted Server.
  1. Install the Role “Network Policy and Access Services” with the Server ManagerInstall Role Network policy and Access ServicesInstall Role Network policy and Access Services 
  2. Select the Role Services “Routing and Remote Access Services”
    Install Role Network policy and Access ServicesInstall Role Network policy and Access Services
  3. Configure and Enable Routing and Remote Access in the Server Manager.
    Configure and Enable Routing and Remote AccessConfigure and Enable Routing and Remote Access
  4. Choose “Custom Configuration” if you just have one Network Interface in the Server
    Custom Configuration
  5. Choose “VPN access”
    VPN access
  6. Finish and click next
    VPN accessVPN access
  7. Allow access for users “Network Access Permission”. You can set that in de Dial-In Tab under the User Premission.
    User Permission Dial-In Access
  8. Open Ports in your Firewall For PPTP: 1723 TCP 47 GRE
    For L2TP over IPSEC: 1701 TCP 500 UDP
    For  SSTP: 443 TCP
Optional: If you don’t have a DHCP Server in your local network you have to add a static address pool. This could be if you have a stand-alone Server by your provider.
  1. Right click on “Routing and Remote Access” and open Properties
    Add Static address pool
  2. Click on the IPv4 Tab and check “Static address pool”
    Add Static address pool
  3. Add a static address pool of private IP addresses
    Add Static address pool
  4. Add secondary IP Address to the Server network interface which is in the same subnet as this pool.

MKRdezign

Contact Form

Name

Email *

Message *

Powered by Blogger.
Javascript DisablePlease Enable Javascript To See All Widget